![]() The front receiving hook of the case deflector could be damaged. When inserting the receiver with the bolt carrier into the stock, care must be taken that this is done carefully. Be careful not to over-tighten the screws to avoid bending the frame or stripping the threads.Insert and alternately tighten the two screws until the Case Deflector sits firmly in the ejection port.Place the Case Deflector in the ejection port with the wedge shaped piece at the rear. ![]() Put the two parts of the Case Deflector together.Unscrew the Corvus Defensio Case Deflector screws half way, using a T-8 TORX driver.Allows weak hand or cross-shoulder stances.Deflects ejected cases forward or to the side, away from the shooter’s face.Fits the Steyr AUG (except 9 mm version and NATO-Stock) and the MSAR STG-556.A possible indicator of a weak ejector spring is the permanent forward ejection of cases, even without using a case deflector. The use of a case deflector can possibly increase this. Weak or damaged ejector springs can cause frequent jams. We like to point out that the ejector spring of the bolt head has to be intact for the case deflector to work properly. Because it is made of hard anodized 7075 aluminum, the plastic stock is also protected against damage when an empty case is not completely ejected. Installation requires no drilling or modification to the stock as the two piece Case Deflector is simply plugged into the ejection port and tightened with two screws. The rifle can be used by a right or left handed shooter without installing a different bolt and changing the ejection port cover. The Corvus Defensio Case Deflector ejects cases forward or to the side and thus makes it ideal to shoot in every combat stance, from either shoulder, without any additional modifications or adaptations.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |